Supplied By www.heating spares.co Tel. 0161 620 6677
3
DOMINA F 24 - 30 E
FERELLA F 24 - 30 MEL
MILOS AIR COMPACT E
Version - 09.2002
1. TECHNICAL CHARACTERISTICS AND DATA
GENERAL
1.1 Introduction
Our appliance is a high-efficiency heat generator for central heating and hot-water production running
on natural gas or LPG (configurable at the time of installation).
The boiler shell consists of a copper laminar exchanger whose particular shape guarantees high exchange
efficiency under all operating conditions and an open-flue burner equipped with electronic ignition and
ionization flame control.
The boiler is totally sealed off from the installation room: the air needed for combustion is drawn from
outside and the flue gases are expelled by a fan. The boiler outfit moreover includes a variable speed
circulator, expansion tank, flow meter, safety valve, filler cock, air pressure switch, water pressure switch,
temperature sensors and a safety thermostat.
Thanks to the control and adjustment system, unit operation is for the most part automatic. The power
for heating is automatically governed by the control system according to the indoor characteristics, the
characteristics of the building and of its location. The power for hot water is automatically and continually
governed to ensure a fast delivery and comfort under all operating conditions.
There are 5 LEDs on the control panel providing information on the unit's operating status.
General Warnings
Installation and maintenance must be carried out by professionally qualified personnel,
according to current regulations and the manufacturer's instructions.
Incorrect installation or poor maintenance can cause damage or physical injury. The
manufacturer declines any responsibility for damage caused by errors in installation and use
or by failure to follow the manufacturer's instructions given in the instructions manual.
Before carrying out any cleaning or maintenance operation, disconnect the unit from the
electrical power supply using the switch and/or the special cut-off devices.
Certification
The CE marking demonstrates that Ferroli gas units conform to the requirements contained in
the applicable European directives.
In particular, this unit complies with the following EU directives:
Gas Appliance Directive 90/396 assimilated with Italian Presidential Decree DPR 15.11.96 no. 661
Efficiency Directive 92/42 assimilated with Italian Presidential Decree DPR 15.11.96 no. 660
Low Voltage Directive 73/23 (amended by 93/68)
Electromagnetic Compatibility Directive 89/336 (amended by 93/68) assimilated with Italian
Presidential Decree DPR 15.11.96 no. 615
