background image

3

Thank you for purchasing this quality-built Ferris product.  

We’re pleased that you’ve placed your confidence in the 

Ferris brand.  When operated and maintained according 

to the instructions in this manual, your Ferris product will 

provide many years of dependable service.
This manual contains safety information to make you 

aware of the hazards and risks associated with this 

machine and how to avoid them.  This machine is designed 

and intended to be used and maintained according to 

the manual and operated by trained professionals for 

finish cutting of established lawns and is not intended 

for any other purpose.  It is important that you read and 

understand these instructions thoroughly before attempting 

to start or operate this equipment.  Save these original 

instructions for future reference.

Identification Tag Location

The product identification tag (A, Figure 1) can be found 

on the right side of the frame underneath the thigh pad. 

Note that the thigh pad has been rotated to reveal the 

product identification tag in Figure 1.

Products Covered by This Manual 

The following products are covered by this manual: 

5901754 & 5901755.

The images in this document are representative, and 

are meant to compliment the instructional copy they 

accompany. Your unit may vary from the images displayed.
Ferris is a registered trademark of Briggs and Stratton 

Corporation. 

Ferris

 

5375 N. Main St. 

Munnsville, NY 13409-4003 

(800) 933-6175 

www.ferrismowers.com

Product Identification Tag 

(Stamped) 

BRIGGS & STRATTON 

CORPORATION

MILWAUKEE, WI 53201, USA

ASSEMBLED IN THE USA

PART NO.
XXXXXXX

SERIAL NO.
XXXXXXXXX

 PRODUCT REFERENCE DATA

Unit Model Number: 
Unit Serial Number: 
Dealer Name: 
Date Purchased:

ENGINE REFERENCE DATA

Engine Make: 
Engine Model: 
Engine Type/Spec: 
Engine Code/Serial Number:

When contacting your authorized service dealer for 

replacement parts, service, or information you MUST have 

these numbers.

Note: For the location of the engine identification numbers, 

refer to engine owner’s manual.

The Illustrated Parts List for this machine can be download-

ed from ferrismowers.com. Please provide model and serial 

number when ordering replacement parts.

1

A

NOT 

FOR 

REPRODUCTION

Содержание 5901754


























Отзывы: