background image

Not for 

Reproduction

3

Thank you for purchasing this quality-built Ferris Zero-

Turn Stand-On Mower. We’re pleased that you’ve placed

your confidence in the Ferris brand. When operated and

maintained according to the manuals, your Ferris product will

provide many years of dependable service.
The manuals contain safety information to make you aware

of the hazards and risks associated with the unit and how to

avoid them. This Zero-Turn Stand-On Mower was designed to

be used as described in this operator's manual and operated

by trained professionals for finish cutting of established lawns

and is not intended for any other purpose. It is important that

you read and understand the instructions thoroughly before

attempting to start or operate this equipment. Save these

original instructions for future reference.

Products Covered by This

Manual

The following products are covered by this manual: 
5901546, 5901547, 5901550, 5901675, 5901678, & 5901687

The images in this document are representative, and

are meant to complement the instructional copy they

accompany. Your unit may vary from the images

displayed. 

LEFT

 and 

RIGHT

 are as seen from the operator's

position. 

Ferris is a registered trademark of Briggs & Stratton

Corporation. 

Identification Tag Location

The product identification tag (A, Figure 1) can be found on

the right side of the frame beneath the battery box mount.

1

 

PRODUCT REFERENCE DATA

 

Unit Model Number: 
Unit Serial Number: 
Mower Deck Model Number:

(if applicable) 
Mower Deck Serial Number: (if

applicable) 
Dealer Name: 
Date Purchased: 
 

ENGINE REFERENCE DATA

 

Engine Make: 
Engine Model: 
Engine Type/Spec: 
Engine Code/Serial Number 

When contacting your authorized service dealer for

replacement parts, service, or information you MUST have

these numbers. 

Note: 

For the location of the engine identification numbers,

refer to engine owner's manual. 

The Illustrated Parts List for this machine can be downloaded

from ferrismowers.com. Please provide model and serial

number when ordering replacement parts. 

Operator Safety

 WARNING 

This product can expose you to chemicals including

gasoline engine exhaust, which is known to the State of

California to cause cancer, and carbon monoxide, which

is known to the State of California to cause birth defects

or other reproductive harm. For more information go to

www.P65Warnings.ca.gov. 

Operating Safely

Read these safety rules and follow them closely. Failure to

obey these rules could result in loss of control of the unit,

severe personal injury or death to you, or bystanders, or

damage to property or equipment. 

This mowing deck is

capable of amputating hands and feet and throwing

objects.

The safety alert triangle (

) in text signifies important

cautions or warnings which must be followed.

Содержание 5901546













































Отзывы: