background image

Thank you

for purchasing this quality-built Ferris product. We’re pleased

that you’ve placed your confidence in the Ferris brand. When operated and
maintained according to the instructions in this manual, your Ferris product will
provide many years of dependable service.

This manual contains 

safety information to make you aware of the

hazards and risks associated with this machine and how to avoid them. This
machine is designed and intended to be used and maintained according to the
manual and operated by trained professionals for finish cutting of established
lawns and is not intended for any other purpose. It is important that you read
and understand these instructions thoroughly before attempting to start or
operate this equipment. Save these instructions for future reference.

Briggs & Stratton Power Products Group, LLC.
Copyright © 2008 Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.

The Ferris logo is a trademark of Briggs & Stratton
Corporation Milwaukee, WI, USA.

Contact Information:

Briggs & Stratton Power Products Group, LLC.
5375 N. Main St.
Munnsville, NY 13409-4003
(800) 933-6175
www.ferrisindustries.com 

ENGINE REFERENCE DATA

Unit Model Number

PRODUCT   REFERENCE   DATA

Unit SERIAL Number

Dealer Name

Date Purchased

Engine Make

Engine Model

Mower Deck Model Number

Mower Deck SERIAL Number

Engine Type/Spec.

Engine Code/Serial Number

DATE PURCHASED

See Page 11 for the location of Identification Numbers

WARNING

Engine exhaust from this product contains
chemicals known, in certain quantities, to cause
cancer, birth defects, or other reproductive harm.

Содержание 5900751



















































Отзывы: