Ferris 5900533 Скачать руководство пользователя | Manualshive

Страница: 32 / 44

background image

30

www.ferrisindustries.com

Troubleshooting, Adjustment & Service

MOWING HEIGHT ADJUSTMENT

See Figure 18. The mowing height adjustment can
be changed by turning the cutting height adjustment
handle.

To Raise the Mower Deck:

Turn the cutting height adjustment handle (A, Figure
18) CLOCKWISE.

To Lower the Mower Deck:

Turn the cutting height adjustment handle COUNTER-
CLOCKWISE.

SEAT HEIGHT ADJUSTMENT

In addition to the operator seat being adjustable in the
forward and back position, the height of the operator
seat can also be adjusted up and down.

To Adjust the Seat Up and Down:

1. Pull the seat adjustment lever (A, Figure 19)

forward and move the seat to the furthest forward
position to provide extra clearance between the
seat and the gas tank.

2. Loosen but do not remove the front seat mounting

hardware (B).

3. Remove the rear seat mounting hardware (C).

4. Maneuver the seat mount (D) until the desired

height is achieved.

5. Reinstall the rear mounting hardware and then

tighten both the front and rear mounting hardware.

6. Pull the seat adjustment lever forward and adjust

the seat to the desired front and back position.

Figure 19. Seat Height Adjustment
A. Seat Adjustment Lever
B. Front Mounting Hardware
C. Rear Mouning Hardware
D. Seat Mount

C

D

B

A

A

Figure 18. Cutting Height Adjustment
A. Cutting Height Adjustment Handle

Not

for

Reproduction

«
...
30
31
32
33
34
...
»

Содержание 5900533













































Отзывы:

Нет отзывов

Похожие инструкции для 5900533

Бренд: MTD Страницы: 12

Бренд: Parker Страницы: 26

Бренд: Cub Cadet Страницы: 68

Бренд: Simplicity Страницы: 45

Бренд: Gama Garden Страницы: 19

Бренд: Gardenline Страницы: 34

Бренд: Toro Страницы: 4

Бренд: Toro Страницы: 48

Бренд: Poulan Pro Страницы: 42

Бренд: Cub Cadet Страницы: 48

Бренд: Bad Boy Страницы: 36

Бренд: Flymo Страницы: 10

Бренд: MTD Страницы: 4

Бренд: Masport Страницы: 5

Бренд: Cub Cadet Страницы: 76

Бренд: Murray Страницы: 142

Бренд: Murray Страницы: 52

Бренд: Murray Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды