background image

Thank you for purchasing this quality-built Ferris Commercial
Walkbehind Mower. We’re pleased that you’ve placed your
confidence in the Ferris brand. When operated and maintained
according to the manuals, your Ferris product will provide many
years of dependable service.

The manuals contain safety information to make you aware of
the hazards and risks associated with the unit and how to avoid
them. This Commercial Walkbehind Mower was designed to be
used as described in operator's manual and is not intended for
any other purpose. It is important that you read and understand
the instructions thoroughly before attempting to start or operate
this equipment. Save these original instructions for future
reference.

This product requires final assembly before use. Refer to the
setup guide for instructions on final assembly procedures. Follow
the instructions completely.

Products Covered by This Manual

The following products are covered by this manual:

5900520

The images in this document are representative, and are meant
to compliment the instructional copy they accompany. Your unit
may vary from the images displayed. LEFT and RIGHT are as
seen from the operator's position.

© 2011 Briggs & Stratton Corporation, Milwaukee, WI, USA. All
rights reserved.

FERRIS is a trademark of Briggs & Stratton Power Products
Group, LLC

Briggs & Stratton Power Products Group, LLC.

5375 N. Main Street

Munnsville, NY 13409-4003

(800) 933-6175

ferrisindustries.com

Identification Tag Location - Flail
Mower

The Product Identification tag (A, Figure 1) can be found in the
location shown.

1

Product Identification Tag (Stamped)

PRODUCT REFERENCE DATA

Unit Model Number:

Unit Serial Number:

Mower Deck Model Number:

Mower Deck Serial Number:

Dealer Name:

Date Purchased:

ENGINE REFERENCE DATA

Engine Make:

Engine Model:

Engine Type/Spec:

Engine Code/Serial Number

When contacting your authorized dealer for replacement parts,
service, or information you MUST have these numbers.

The Illustrated Parts List for this machine can be downloaded
from ferrisindustries.com. Please provide model and serial
number when ordering replacement parts.

3

Not 

for  

Reproduction

Содержание 5900520

























Отзывы: