16
●
Do not use solvents (such as benzine, alcohol, etc.) for cleaning, it could damage the
plastic parts.
●
Use protective gloves when cleaning the drums.
Storage and Transport
ATTENTION! The engine must be completely cooled down before storing the
machine.
●
Unplug the machine from the power socket.
●
Replace worn or damaged parts.
●
Store the machine in a dry, clean and frost
-
free place, out of reach of unauthorized
people.
●
Clean after each use.
●
C
lean the machine and accessories thoroughly (see "Maintenance and cleaning").
This will prevent the formation of mold.
●
Do not store the machine in direct sunlight for a long time.
●
Do not use plastic foil as dust protection. The impermeable cover retains mo
isture
and leads to corrosion.
●
You can fold down the guide rail to make it easier to store. To do this, loosen the
wing nuts until the guide rail is loose enough.
●
Be careful not to bend any cables.
NOTE: When storing the machine, make sure that it is free of rust. Wipe the
machine, especially the moving parts, with light oil or silicone.
When moving the machine, the drum must be switched off and the scarifying
plate raised as high as possible.
●
Unplug the machine from the power socket before transporting.
●
The drum can be damaged during transport, e.g. hard surface, even when the engine
is switched off. Therefore, set the drum to the highest level.
Transport on a Trailer
●
Switch off the engine and unplug the machine from the power socket. Protect the
machine from falling and do not place it near other objects. Do not place any other
objects on the machine.