29
Use
If the setting is correct, the friction clutch is triggered
when the screw head is flush with the workpiece. The
ideal torque can be best determined using a piece of
excess material.
• Match the desired torque
(1 – 6) on the setting
scale (10) of the machine
housing with the setting
mark (8).
Operating information
Generally speaking, screwdriver bits are labelled with
their dimensions/sizes and shape. If you are unsure,
check by hand whether the bit fits into the screw head
without play.
Tip:
It is possible to install screws with a ground thread into
softwood without pilot drilling. Pilot drilling is
recommended for other woods or when using large
screw diameters.
You will need to countersink the hole for countersunk
screws.
8
10
FX-5902193-94-Bedien-1902 04.04.19 11:51 Seite 29
