FERREX 703353, Руководство пользователя

Страница: 14 / 18

Kapitelüberschrift
18
m
ATTENTION! Risk of moving parts.
• Swivel the drum in the downward direction to empty it.
• Ensure that there is an adequate container under the drum (e.g., wheelbarrow).
• Ensure that no mixture falls on the ground.
IX. Cleaning and Maintenance
Pull out the power plug before every maintenance operation. There is a risk of electrocution
or of injury from moving parts.
Cleaning
m
ATTENTION! Never put hands inside the drum with drum rotating.
Thoroughly clean the machine at the end of each day’s operation. Keep your machine clean. The
slightest trace of material left in the drum will harden and attract more each time you use it until
the machine is useless. Dried cement should be scraped out of the drum. Do not throw bricks
into the machine drum to clean it out. Do not beat on the drum with a shovel, a hammer or other
tools to break up accumulations of dried cement mix, as damage to the machine may result.
Maintenance
Before plugging in the machine, check all nuts and bolts are tight, that the drum turns freely
and there is no damage to the motor casing cable or plug. Do not use if any part is broken or
missing.
X. Troubleshooting
Problem Possible Cause Action
Engine does not
start.
No power supply.
Check the voltage. Technical data
given on the type label must
correspond with electric network
voltage.
Broken cable.
Any checks or replacements to
be provided by a professional
electrician.
Equipment star-
ting but getting
blocked under
small load and
switching auto-
matically off.
The extension cable is too long or
with a small cross section.
Extension cable to be at least 1.5
mm
2
for a length of up to 25 m.
The socket is too far from the main
line and the extension cable has a
small cross section.
Cross section of at least 2.5 mm
2
for longer cables.
Cleaning and Maintenance / Troubleshooting