FERREX 13177, Руководство пользователя

Страница: 27 / 40

AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com 1300 889 028
51.7cc 2 Stroke Petrol Backpack Blower
MODEL: №. SBV521 • 02/2020 • 13177
25
4) Turn the choke knob (10) anti-clockwise to "Run" position. (See Fig. J2)
5) Firmly hold the recoil starter (24) with the other hand and pull it out
slowly until resistance is felt, then pull it hard rapidly until the engine
starts. (See Fig. K3)
6) Squeeze the throttle trigger (15) slightly to release the throttle lock.
7) Now the blower is ready for placing on the user's back with shoulder
straps. Refer to Fitting & adjusting the shoulder straps.
Adjusting the blower speed
The blower speed must be proportionate to the type of work.
- To adjust by controlling the throttle trigger (15) (See Fig. L1)
If you want to adjust the speed at any time by
yourself, you can control the blower speed by
adjusting the throttle trigger (15) located on the
throttle control handle (8).
1) While working, keep the stop/start/MAX speed
lever (16) at the start position as indicated by an
"I" in Fig K1, and push in the throttle trigger (15)
continuously, the blower speed will increase with
pressure. Slowly release the throttle trigger (15) to
decrease the blower speed.
- To adjust by controlling the stop/start/MAX speed lever (16) (See Fig. L2)
If you do not want to always putting your fingers
on the trigger (15), you can also control the blower
speed by only adjusting the stop/start/MAX speed
lever (16). In this way you can free your hands and let
the blower control the speed itself.
1) Place the stop/start/MAX speed lever (16) at the
start position as indicated by an "I" in Fig K1. Then
continue to push the speed lever (16) downwards
slowly to the lowest position "MAX" as indicated in
Fig. L2. The blower speed will increase and achieve
to the maximum speed when the stop/start/MAX speed lever (16) is
placed exactly at the "MAX" position.
NOTE:
While adjusting the speed lever (16) from position "I" to "MAX",
the throttle trigger (15) will be automatically depressed to the end. You
can disregard it since at this time the trigger (16) will no longer affect the
speed adjustment when the stop/start/MAX speed lever (16) is put in the
"MAX" position.
L1.
L2.