2
Connect to your Ferret Camera
Turn on your Ferret camera. The camera power switch is at the
back of the camera under the back cap. The camera will take
about 2 seconds to boot and power on.
NOTE:
The camera is IP67 rated only when the back cap is in place.
On your phone or tablet, turn on WiFi and search for the
Ferret-Plus-XXXX
SSID
in the WiFi list. The Ferret camera has a built in WiFi hotspot, so no other
WiFi network is needed.
NOTE:
The camera will not link via Bluetooth – it is WiFi only.
3
Enjoy using your Ferret Camera and start saving time & money,
working safer & smarter.
