Ferrari GTC 4 Lusso, Руководство по аварийной помощи на дорогах

Страница: 22 / 45

22
Moving the vehicle
●
Electronically controlled gearbox safety warnings
●
EPB deactivation warning
If the next scheduled maintenance deadline is approaching, each time
the key is turned to on, information on scheduled maintenance is
automatically displayed after diagnosis.
Finally, each time the key is turned to on, the message for activation
of the alarm when an intrusion has been attempted is also displayed
(after diagnosis). Once the system check has been completed, the gearbox
display is activated and the letter “P” (Parking) or “N” (Neutral) will be
displayed.
Important note
BEFORE YOU DRIVE
If the gearbox warning light does not turn off after diagnosis, indicating
a fault in the gearbox (which is also indicated by a symbol and specific
message on the left TFT display), contact the F
ERRARI
S
ERVICE
N
ETWORK
.
Important note
The vehicle is equipped with an electro-hydraulically controlled
gearbox system operated by means of paddles on the steering wheel.
The default setting for the DCT gearbox is always “Automatic” mode.
Every time the vehicle is started, the DCT gearbox is in “Auto easy
exit” mode unless the vehicle was in “Automatic” mode when the
engine was turned off.
To exit the “Auto easy exit” mode, operate the UP and DOWN paddles
(while the vehicle is moving) or press the AUTO button on the centre
console.
Important note
Immediately release the UP and DOWN paddles or button R after the
gearbox display shows that the gear has been engaged; a prolonged
manoeuvre will cause the failure warning light to turn on and trigger
the buzzer.
Important note
If the engine compartment lid is open or not properly closed, none
of the gears can be engaged. When the vehicle is stationary, with
the driver-side door open or not properly closed and the brake pedal
released, the system disengages the gear engaged after approximately
two seconds.
“Key-Less” ignition system
The new Ferrari keys use a Key-Less vehicle ignition system which can
be used to switch on the instrument panel and the engine by simply
placing the key inside the vehicle near the driving area. The dedicated
ECU recognises the vehicle key by the electronic ID code it contains. The
ENGINE START/STOP button on the steering wheel controls KEY-ON,
KEY-OFF, ENGINE START and ENGINE STOP.
●
KEY-ON , to activate the vehicle system (instrument panel, air
conditioning and heating system, infotainment system, etc.), press
and quickly release the ENGINE START/STOP button on the
steering wheel.
●
KEY-OFF , to deactivate the vehicle system without starting the
engine, press the ENGINE START/STOP button on the steering
wheel again.
●
ENGINE START , to switch on the engine, press down the brake
pedal and press the ENGINE START/STOP button on the steering
wheel.