ferolli ROMEO N, Руководство пользователя

Страница: 121 / 188

2. CONFIGURE AND OPERATE THE REMOTE CONTROL IN 4 EASY STEPS
2.1 (Step 1) Correct setting of time and day
_________________________________________________________________________________________________________________________________________________
1. Press the button . The day starts blinking:
press the buttons / to set the correct
day where DAY 1 is Monday and DAY 7 is Sunday.
2. Press the button . The hour starts blinking:
press the buttons / to set the correct
hour from 00 to 23.
3. Press the button . The minutes start blinking:
press the buttons / to set the correct
minutes from 00 to 59.
4. Press the button .
_________________________________________________________________________________________________________________________________________________
2.2 (Step 2) Setting the automatic weekly program
After setting the time and day, the Remote Control will follow the preset automatic program. The heating program includes 6
daily time bands for the temperature level, numbered from 1 to 6. The time bands can be set between 00:00 and 24:00, adjusting
them in 10-minute increments. Each temperature level can be set between 7°C and 32.5°C, adjusting it in 0.1°C increments.
It is therefore possible to program any combination of time and temperature during the day, and each day of the week can be
different. The preset automatic program is as follows:
From Monday to Friday Band 1 Band 2 Band 3 Band 4 Band 5 Band 6
Start time 06:30 08:00 12:00 14:00 18:00 22:30
Temperature level 21°C 18°C 21°C 18°C 21°C 16°C
From Saturday to Sunday Band 1 Band 2 Band 3 Band 4 Band 5 Band 6
Start time 08:00 10:00 12:00 14:00 18:00 23:00
Temperature level 21°C 21°C 21°C 21°C 21°C 16°C
code 3541Z220 - Rev. 05 - 12/2021
EN 121