manualshive.com logo in svg

Ferno Mondial MB64, Руководство пользователя, Страница: 32 / 36

Поделиться
Скачать
Ferno Mondial MB64 Скачать руководство пользователя страница 32

© Ferno-Washington, Inc. / 234-3480-06 / November 2017

32

Maintenance

1

1

2

7.9  Lubricating the Cot

Disinfect and clean the cot before applying lubricant. Use the lubricants 

designated below to lubricate the cot. Do not lubricate points marked 

with the “do not lubricate” symbol.

LUBRICATION POINTS

1. 

Telescoping handle (4) 

WRL-191S or E-Z-1 (1-2 drops)

2. 

Shock frame hinge (2) 

WRL-191S or E-Z-1 (1-2 drops)

3. 

Loading-wheel linkage (4) 

WRL-191S or E-Z-1 (1-2 drops)

4. 

Swivel-caster lock pins (2) 

clean w/mild detergent/water (typical);

 

 

Clear synthetic grease/Loctite® 39342 ViperLube® (rarely)

5. 

Airway management hinge (2)* 

WRL-191S or E-Z-1 (1-2 drops)

*If equipped

LUBRICATION-FREE ITEMS

  Channel* 

Do not lubricate

  Rollers 

Do not lubricate

  Wheels (sealed bearings) 

Do not lubricate

  Leg pivot points 

Do not lubricate

   Backrest hinges 

Do not lubricate

* The channels do not require lubrication. Lubricating the channels or rollers will 

cause foreign particles to stick to the rollers and channel, causing damage.

Do Not Lubricate

Lubricate

Applying Lubricant

Use a small amount of lubricant (one or two 

drops). Lubricate identical points on each side 

of the cot. After applying lubricant, wipe off any 

excess.

Important

Lubricating parts that should not be lubricated allows dirt 

and foreign particles to collect on those parts, resulting in 

damage. Lubricate 

only

 the numbered reference points 

shown.

5

4

3

Содержание Mondial MB64





































Отзывы:

Нет отзывов