22
© Ferno UK Ltd. FERNO/MAN/02/14/209 UK
Harrier LT / Harrier LT-LBS
Maintenance
InSPeCTIon CHeCKLIST
●
Are all components present?
●
Is the trolley generally free of excessive wear?
●
Are all screws, nuts, bolts, rivets, and roll pins securely in place?
●
Do all moving parts operate smoothly and properly?
●
Does the trolley raise and lower properly into position?
●
Does the trolley roll smoothly?
●
Do the wheel castors and brake operate properly, rotate fully and have adequate tread?
●
Are the patient restraints and harness properly installed?
●
Are the restraints, mattress and harness in good condition with no cuts or frayed edges?
●
Are restraint buckles free of visible damage and do they operate properly?
●
Check that the battery is fitted to the trolley and that it is fully charged at the beginning of each shift (charge at least once
every 5 days).
●
Press the button located on the battery pack and check the red LED’s light up test the battery and ensure it is ready to use.
●
Confirm the operation of the trolley by using the up/down control buttons on the foot end main frame. These will be
illuminated red/green.
●
Check the trolley mattress and patient restraining system for damage and that they are secured correctly.
●
Check that the trolley cotsides raise, lower and lock in position.
●
Check that the ambulance has a properly installed, approved locking device.
●
Check the operation of the push/pull handles and ensure the head end handle clips in the stowed position.
●
Study this manual before use. Practice without a patient until fully competent in using the trolley.
7.5 Inspecting the Trolley
To ensure consistently safe operation of the trolley and to monitor wear and tear, prior to each use, ensure the trolley is thoroughly
checked in compliance with the following checklist.
