2
Ferno Walk Belt
+61 7 3881 4999 / [email protected] / WWW.FERNO.COM.AU
2
3
4
5
2. Release the left leg strap buckle. Wrap the long left leg strap
around the back of the left leg to the front of the leg via the groin
area and re-connect the buckle (Figures 2 and 3). Adjust straps if
required, for a snug and comfortable fit.
3. Repeat Step 2 with the right leg strap.
4. Once the Walk Belt is securely fastened to the patient, the operator
can use any of the vertical or horizontal hand holds (Figures 4 and
5) to assist the patient while walking.
Long Leg Strap
Leg Buckle
Vertical Hand Hold
Horizontal Hand Hold
NOTICE
The leg straps must be fitted to the patient if the patient is
to be moved from either a standing-to-sitting position or
vice versa. The leg straps are designed to support the patient
during these manoeuvres and keeps the Walk Belt in its
original fitted position.
Inspections
Inspect the Walk Belt to ensure it is fit for duty before stowing it
away. An Inspection Check List is provided as a guide. Refer any
signs of deterioration to a competent or designated person for a
decision on the safety and serviceability of the product.
WARNING
The leg straps are not designed or rated to take the
patient’s entire weight. Do not use the Walk Belt as a
lifting harness.
Cleaning
This product should be cleaned regularly to maintain its safety and
serviceability.
1. Brush off loose dirt.
2. Spray on a cleaning solution (bleach-based solutions are not
recommended).
3. Use a soft bristle brush to clean.
4. Allow cleaning solution to soak into the webbing.
5. Hand or machine wash up to 40° Celcius.
6. Air dry in a well ventilated area, away from direct sunlight.
Storage
Store the product away from direct sunlight, excessive dust and
moisture, and corrosive atmospheres.
WALK BELT INSPECTION CHECK LIST
WEBBING
Fraying, cuts or tears
Damage due to heat, corrosives or solvents
Deterioration due to rotting, mildew or
ultraviolet exposure
SEWING
Broken, cut or worn stitches
BUCKLES &
ADJUSTERS
Buckles are securely sewn to Walk Belt webbing
Quick Connect Buckles engage positively when
connected
Quick Connect Buckle release mechanism
operates smoothly when activated
