Ferno 35A+ Скачать руководство пользователя страница 4

Страница: 4 / 30

Model 35A Series

1 - SAFeTy iNFORMATiON

1.1 Warning

Warning notices indicate a potentially hazardous situation

which, if not avoided, could result in injury or death.

WARNiNg

Untrained operators can cause injury or be injured.

Permit only trained personnel to operate the cot.
improper use of the cot can cause injury. Use the cot only

for the purpose described in this manual.
Attaching improper items to the cot can cause injury. Use

only Ferno-approved items on the cot.
Failure to use the safety hook can cause injury. install and

use the safety hook as described in this manual.
improper operation can cause injury. Operate the cot

only as described in this manual.
An unattended patient can be injured. Stay with the

patient at all times.
An unrestrained patient can fall off the cot and be injured.

Use restraints to secure the patient on the cot.
Rolling the cot sideways or in a loading position can cause

the cot to tip and injure the patient or operators. Roll the

cot only in a level (rolling) position and with the head-end

or foot-end first.
False locking can cause injury. After changing positions,

lift the cot until all the wheels are off the ground. This

allows the lock to engage if it has not already done so.
helpers can cause injury. Maintain control of the cot,

operate the controls, and direct all helpers.
helpers can be injured. Show helpers where to grasp the

cot to avoid pinch points.
improper maintenance can cause injury. Maintain the cot

only as described in this manual.
improper parts and service can cause injury. Use only

Ferno parts and Ferno-approved service on the cot.
Modifying the cot can cause injury and damage. Use the

cot only as designed by Ferno.

1.2 important

Important notices emphasize important usage or maintenance

information.

important

1.3 bloodborne Disease Notice

To reduce the risk of exposure to bloodborne diseases such as

HIV-1 and hepatitis when using the cot, follow the disinfecting

and cleaning instructions in this manual.

1.4 Cot and Fastener Compatibility

Combining different manufacturers’ products into a “mixed-

component” cot/cot fastener system can increase the user’s risk

of injury and damage.
Ferno-Washington, Inc. strongly recommends that only

Ferno-manufactured cots be used in Ferno-manufactured cot

fasteners, and that only Ferno-manufactured cot fasteners be

used for securing Ferno-manufactured cots in ambulances.
ANY COMBINATION OF A FERNO COT OR COT

FASTENER WITH A NON-FERNO COT OR COT

FASTENER IS MISUSE OF THE FERNO PRODUCT.

Responsibility for the outcome of known, intentional misuse

rests squarely on the misuser.

Safety Information

1.5 Symbol glossary

The symbols defined below are used on the cot and in this users’

manual. Ferno uses symbols recognized by the International

Standards Organization (ISO), American National Standards

Institute (ANSI) and the emergency medical services industry.

General Warning

of Potential Injury

Pinch Point:

Keep Hands Clear

Read the

Users’ Manual

Cot Operation Requires

Two Trained Operators

Unlocked Locked

Product meets

European Union

Standards

Do Not

Lubricate

Load Limit

500 lb

227 kg

Do Not Fold Cot

With Items On Tray

Содержание 35A+































Результаты поиска

Содержание 35A+

Отзывы:

Бренды по названию

Популярные бренды

Ferno 35A+, Руководство пользователя

Результаты поиска

Содержание 35A+

Отзывы:

Бренды по названию

Популярные бренды