Pag 20
90º
1
2
3
1.60m
FROM THE
FLOOR
TEST
+ -
CT
M
V
+ -
CT
M
V
1. Use a plain screw-driver to separate the
base from the
Monitor
. Put it in, rotate
and slide the
Monitor
up.
2. Install the
Monitor
on a hard and flat
surface. Mark and drill the wall at the
holes in the base.
Camera Test Connector detail
The test connector included in the CityMax camera is used for testing that
both camera and
Monitor
are working correctly. Once the
Monitor
is plugged
into this connector the screen will be activated automatically.
1. TEST connector Detail.
2.
Monitor
Test directly in the
Outdoor
Panel
.
MONITOR INSTALLATION
The CityMax monitors allow a quick and easy installation, without neccesity
of doing any kind of building-work. Do not remove the screen protection film until
the
Monitor
is completely installed.
