Ferm CDM1096 Скачать руководство пользователя страница 5

EN

5

Ferm

Do not use in rain.

Indoor use only.

Maximum temperature 40 °C.

Do not throw the battery into fire.

Do not throw the battery into water.

Thermic protection 130 °C.

In case of failure, the transformer in not 

dangerous (separated circuit).

 Ni-Cad batteries can be recycled. Drop 

them off at a disposal center for chemical 

wastes, so that they can be recycled or 

disposed of in an eco-friendly manner.

Always recycle batteries

General safety instructions.

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use of the 

appliance by a person responsible for their safety. 

 

Children should be supervised to ensure that they 

do not play with the appliance.

Important safety notes on charger and battery 

block

 If you come in contact with acid from the 

battery block, rinse it off with water 

immediately. If acid gets into your eyes, 

rinse out your eyes at once with water and 

contact a doctor immediately!

1.  Read and note the operating instructions and 

safety notes for the charger and battery block 

before use!

2.  NB! Only use the charger and battery block 

that were supplied by the manufacturer - 

otherwise you will risk an accident.

3.  Protect the charger, battery block and power 

tool from moisture, e.g. rain or snow.

4.  Always check that all cables are connected 

correctly before using the charger.

5.  If you discover that a cable is damaged, you 

should not use the charger again. Have the 

damaged cable replaced immediately.

6.  When the charger is not in use, the mains plug 

should be removed from the power socket. Do 

not pull out the plug by grasping the cable.

7.  If the charger has been dropped or has 

otherwise been exposed to high mechanical 

stresses, you should have it checked for 

damage by an authorised dealer before using 

it again. Damaged parts should be repaired.

8.   Exercise caution when handling the battery 

block and do not drop it or expose it to 

impacts.

9.  Never attempt to repair the charger or battery 

block yourself. Repairs must always be carried 

out by an authorised dealer - otherwise you 

risk an accident.

10. Before cleaning or servicing the charger or 

battery block, always pull the plug from the 

charger socket.

11.  Never charge the battery block when the 

ambient temperature is below 5 °C or above 

40°C.

12. The air vents in the charger must never be 

blocked.

13. The battery block must not be short-circuited.

 A short-circuit will cause a high current to 

flow. This may result in overheating, the 

danger of fire or explosion of the battery 

block. This may damage the battery block 

or the user may risk an accident.

Therefore:

 Do not connect any cables to the poles of the 

• 

battery block.

 Take care that there are no metal objects 

• 

Содержание CDM1096













Отзывы: