Ferm Industrial HAM1017P Скачать руководство пользователя страница 4

Страница: 4 / 12

When operating the appliance

• If you are going to use the hot air gun, vapours

and gas can be released during a short time.
This can be harmful for your health. Asthmatics
can suffer hindrance of it;

• Before connecting the plug to the mains

voltage you have to check if the switch is in
position “0”;

• Keep the mains lead always away from the

mouthpiece of the hot air gun;

• Keep children and animals away from the

appliance if you are using it.

Immediately switch off the appliance when:

•   Plug and/or cable are defective or damaged;
•   The switch is defective;
•   You smell or see smoke caused by scorched

insulation from the hot air gun.

Electrical safety

When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.

Always check that the power supply
corresponds to the voltage on the rating
plate.

Class II machine – Double insulation –
You don’t need any earthed plug

Replacing cables or plugs

Immediately throw away old cables or plugs
when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in
the wall outlet.

Using extension cables

Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. USING THE APPLIANCE

The Hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes;

• Removing paint, varnish and lacquer without

firerisk;

• Quickly drying of appliances which have

become wet;

• Drying surfaces for quick repairing;
• Removing self-adhesive labels in a clean way

placing PVC labels;

• Blistering after sticking PVC materials can be

smoothed after heating;

• Easy removing of vinyl carpeting:
• Forming all synthetics with a low temperature

(450 degrees) among which polyethylene and
PVC;

• Forming all synthetics with a high temperature

(580 degrees) among which acryl and plexiglass;

• Smelting synthetics, among which matters and

foils with PVC layer;

•   Applying heat shrinking tubes;
•   Shrinkwrappers;
•   Thawing tubes and engines;
•   Repairing finishing layers: enamel of bath and

household appliances;

• Applying epoxypowder coverlayers;
• Repairing of ski’s, surf-boards and other

sports goods;

• Unscrewing too fast fixed screws and

connections.

Operation
Fig. A

You can work manually with this hot air gun or you
can put it in a vertical position.
• Check if the mains switch is on position “0”

before you connect the apparatus;

• Keep the main lead always away from the hot

air stream and the mouth piece;

When the temperature is excess 600° C, the heats
switches it off automatically, however, the heater
continues to run. When the heater has cooled to
operating temperature, the heater is switched on
again.

Switching off:

Slide the switch to 0.

Tip

: If you want to get the best result, test all

appliances on a little part of the workpiece.