Examples:
set eth0 access listed
set frw snat_ip1 10.10.1.0/24
set sys name gate
show command
The show command displays the current settings. It has analogous syntax to the set.
This commands displays the saved settings.
Syntax:
show<interface>|class|snmp|download|redir|firewall|config|sys[tem]
[<args>]
show sys temp[erature]]|date|time|ver[sion]|up[time]|[host]name
show (if|eth|br)[:] # displays summary of all interfaces in given
Examples:
manager$ show eth0
ip_addr: 242.225.10.1
netmask: 255.255.255.248
access: all(2)
verify: no(0)
or
manager$ show eth0 access
access: listed(1)
add, del commands
Those commands create (delete) objects in specific subsystems. Their usage is docu-
mented with every subsystem. When add is used with array parameters, it uses the
parameter after the last one:
Example:
manager$ add frw snat_ip 1.1.1.1
snat_ip1: 1.1.1.1/32
manager$ add frw snat_ip 1.1.1.2
snat_ip2: 1.1.1.2/32
manager$ set frw snat_ip2 2.2.2.2
snat_ip2: 2.2.2.2/32
manager$ del frw snat_ip2
reload command
reload commands applies all the changes done by the set or route commands.
You can reload specific or all subsystems. More subsystems could be specified, sepa-
8
TRAFFIC MANAGER E-4000
