Ferguson Smart Wifi Plug, Руководство пользователя

Страница: 8 / 10

Remote control condition
The number of personnel allowed to control
The current online personnel number
Historical records
Step 6. AP mode
Press the button for about 10 seconds, until LED flash
slowly from quickly, then release the button, now WiFi
plug work as AP mode.
Step 7.Connect the AP mode operation method
Scan and connect the WiFi plug SSID in smartphone or tablet. The plug SSID comes with
"WeConn"& plug Mac address. (for example, WiFi SSID: WeConn7cadd90659033), Click
connect, when interface shows “connected” exit setup interface. Now turn on WeConn app. All
operations remain same.
AP mode means direct connection(which is wireless remote control, not control through
internet), under AP mode. Remote control is unavailable and distance can be controlled is
limited.
Remarkscheck following points if connection failed
1) check if IP address of the WiFi router is full or not, see how many devices have connected to
WiFi router already, or setup WiFi router' s connect website based on user manual, or contact
WiFi router' s distributor, after-sales service, manufacturer etc.
2) Check if WiFi router is normally working, and it's internet speed situation
3) Check if distance too long so signal too weak to connect
4) Check if APP device have connected to the configuration WiFi router normally
5) Pull WiFi plug out, 5 seconds later, insert it in outlet and configuration, reset to factory
default again.
6) Convert AP mode to client mode, only need to reset WiFi plug to factory default, then
connection it to WiFi router and configuration again.
8