Ferguson Regent Cucina, Руководство пользователя

Страница: 15 / 34

15

When the device is in initializing stage, then you will see LED segments to
display as animation showed below:

This stage should last for about 2-3 minutes to complete;

Then the clock time will be showed on LED segment display for view (CT
sync and adjust automatically);
or

The clock time may not be adjusted if those background received FM
station(s) have no RDS’s CT signal provided or RDS signal’s strength is too
low (in this case the clock should show “00:00” );
d. Manual clock set adjustment methods:

Shortly press the “ /ST (5)” button to entry time format set;

The LED display will show blinking “24H” or “12H” for 6 seconds (factory
defaulted is “24H” );

Rotate the “Adjustment (16)
”
button to “ ” or “ ” to select the expected
time format;

Shortly press the “Adjustment (16)
”
button to confirm the time format set
and go for hour set. Hour will be blinking;

Rotate again the “Adjustment (16)
”
button to “ ” or “ ” to select hour
time as current time;

Shortly press again the
“
Adjustment (16)
”
button to confirm hour time set
and go for Minute set. Minutes will be blinking;

Rotate again the “Adjustment (16)
”
button to “ ” or “ ” to select the
minute time as current time and shortly press the “Adjustment (16)
”
button to confirm the minute time set and go for CT on/off set. The “Ct On”
or “Ct OF” will be blinking;

Rotate again the “Adjustment (16)
”
button to “ ” or “ ” to select the “Ct
On” or “Ct OF” as you expect;

Shortly press again the
“
Adjustment (16)
”
button to confirm;

The clock set adjustment is completed and clock time shows LED display.
Information for CT on/off function:

By design, the Bluetooth Kitchen Clock Speaker will sync once the clock
time at 2:00 (AM) by every midnight. This function is to keep the clock time
up-to-date.

The CT function for clock’s time sync can be turn off and on as you