HearMe CD250BT
BASIC OPERATIONS
Preparation
1. Check if all the connections are right and then insert.
2. Press the
POWER ON/OFF
button on the rear panel of this unit.
3. Press the
STANDBY
button to switch on the unit or switch to standby mode.
4. Press the
EJECT
button to move the disc holder out. Put the disc on the disc holder
and press the
EJECT
button again.
5. The player will start loading the disc and playing the disc automatically.
Mode selection
Press
SOURCE
button on front panel or press the
CD, BT, FM, AUX, USB
buttons on remote
control to enter
CD, Bluetooth, FM(Tuner), AUX IN(Audio)
or
USB
mode.
Number buttons
The number buttons is used to select tracks/frequency/presets, etc.
Volume setting
Press the
VOL+/-
buttons on remote control or rotate the volume knob on the front panel to
adjust the volume.
Mute button
Press the
MUTE
button to mute the sound. Press again or press
VOL+/-
buttons to resume
the volume level.
Previous and next
Press the
button to go to the previous song or the
button to go to the next song.
Fast Forward and Rewind
Press the
or
button to fast forward or fast rewind by speed X1 (press once), or speed
X2 (press twice), press the third time to resume the normal speed.
Enter
Press the
ENTER
button to enable the selected items or start playback.
Play/Pause
Press the
PLAY/PAUSE
button to pause the playback, press again to resume.
Stop
Press the
STOP
button to stop playback, press the
PLAY/PAUSE
button to re-start.
8
