Ferguson FT-8200 HD, Руководство пользователя

Страница: 11 / 15

11
1.3 Delete All Programs
This operation will irreversibly delete all programs from receiver.
1.4 Reset System Setting
This operation removes any changes made by the user. The receiver will return to its factory settings.
Upon completion of this operation receiver will automatically be rebooted.
1.5 Firmware Update Via USB
Warning: Do not turn off the power during the update. This risks lasting damage to
equipment.
Once you get the right file from your franchiser, please upgrade
software as following steps:
1. Format your USB disk to FAT32 file system and copy
image.dat
to USB disk;
2. Power off receiver and pull out antenna
3. Insert USB disk to receiver’s USB port
4. Power on STB, and then enter into
Installation->Firmware
update via USB .
5. Then the system will check the USB device and upgrade
software by itself. If successful, the menu will display the progress
of updating .
6. Once the progress is 100%, please power off STB and pull out USB disk, then restart your STB again.
7. Please check the software version in the
System Information->SW/HW Information .
2. System Setting
2.1 Audio Setting
User can choose below options of volume control:
Digital output mode: PCM or AC3.
Sound track: Left, Right or Stereo.
Volume control mode: United or Single.
Language chooses: Primary Language and Second Language.
2.2 Video Setting
User can choose below options of video control:
Aspect ratio: 4:3 or 16:9.
Screen Format: Full screen, LetterBox or Pan&Scan.
Resolving: 1080i or 720p.
TV system: Auto, NTSC, SECAM or PAL.