Ferguson F01SDB, Инструкция по эксплуатации

Страница: 17 / 26

15 15
Change Pin Code
This menu allows users to change pin code
1), Enter the System Setting menu, press the "UP" or "DOWN" cursor to highlight
the Change Pin Code menu.
2), Press the "OK" button to enter the sub-menu.
3), Enter the old pin code using the numeric buttons(Default pin code is 888888).
4), Press the "UP" or "DOWN" cursor to select "New Pin Code" and enter six new
numbers with numeric buttons(0~9).
5), Press the "UP"or "DOWN" cursor to select "Enter Again", and enter the new
pin code again with numeric buttons(0~9).
6), Press the "OK" button to confirm the changed pin code.
Software Update
This menu allows users to update the software version.
1, Enter the System Setting menu, press the "UP" or "DOWN" cursor to highlight
the Software Update menu.
2, Press the "OK" button to enter the sub-menu,
Auto Mode:
1), Enter the software update menu, press the "UP" or "DOWN" cursor to
highlight Auto Mode.
2), Press the "OK" button to enter Auto Mode menu,
3), Press the "LEFT" or "RIGHT" cursor to set the status to "ON",
4), Press the "UP" or "DOWN" cursor to select Start Time. Use the numeric button
to enter the time in HH:MM mode.
5), Press the "OK" button to save the setting and quit, then the system will start
auto update at the set time.