Ferguson Eye Drive FHD170, Инструкция по эксплуатации

Страница: 5 / 9

1.3 Preparation for First Use Device Installation
•
Fix the vehicle-mounted power line based on
that the specific interior environment can’t
affect the driving sight. Recorder should be
located in front of the interior mirror to get
more comprehensive view.
•
Do not install the equipment in the position
which will scatter the driver’s attention or
block the sight line.
•
Part of the vehicles model still have power
source unit after the engine is gone. You should
pull out the vehicle-mounted power line when
leaving the car to avoid the accident.
1.4 Installing the TF card
•
Please choose the TF card of class 10.
Card
capacity
1080P Video
recording time
64GB
32GB
16GB
8GB
4GB
560 minutes
280 minutes
140 minutes
70 minutes
40 minutes
The above data is for reference only
•
Please format the TF card before using the machine when using the TF card in the first time.
2. Car DVR settings
2.1 Software Setup
•
Language setting. Press the menu button to enter into the main menu, press the up/down
button to select “language selection” menu, and press OK button to enter, then press the
up/down button to select language needed, and press OK button to save.
•
Time setting ： For the first use, shortly press menu button to enter into the menu setting
interface, press the up/down button to select “system setting” menu, press OK button to
enter, press the up/down button to select “clock setting” option, press OK button to enter.
Press the up/down button to set the current option, press OK button to enter next option, exit
after completion.
2.2 The Major Function and Basic Operation of Machine:
•
The On and Off of the Machine
✔
In normal driving mode: Connect the vehicle-mounted power well. The machine
would be on and start to record automatically when the car is on, which shall be off
automatically when the car is off.
5