‘
oscam.conf
’
→
Do not change these data for the
Web Interface. If you change them
on the web interface, change them
here accordingly.
Enter DES key
→
After you edited both files copy them to a USB memory together with the ‘
oscam.server
’ file and
connect it to the device.
Press
MENU
key and enter ‘
7799
’ with the numeric keys and the ‘
Loading
’ icon will be displayed. It is
important that the ‘
Loading
’ icon is displayed.
If it is not displayed, enter again ‘
7799
’ with the numeric keys. The ‘
Loading
’ icon indicates that the files
are copied to the device and it will start to run as Server.
To check if both files has been copied, enter the Oscam Web Interface (
http: // IP of the set)
and
enter ‘
FILES
’ and then ‘
oscam.conf
’ and ‘
oscam.user
’. The copied data are displayed. If they are not
displayed, try again.
After you run the device as server, it is possible to check and to edit the settings via the Oscam Web
Interface. If you change a setting via the Oscam Web Interface or from USB always reboot your device!
Enter the server
port @ CAID(Card ID) : provider ID
If there are multiple provider IDs add a ‘comma’ between the ID’s.
Check the CAID and provider ID of the card from the Card reader menu
(Menu > Settings > Card reader) Refer to below Card example.
