❑
Wipe surfaces clean and rinse completely with water immediately after applying cleaner.
❑
Rinse and dry any overspray that lands on nearby surfaces.
❑
Do not allow cleaners to soak on surfaces.
❑
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scrubing
pad to clean surfaces.
Removing Minor Surface Damage
Your solid surface acrylic bath is strong and durable, and will provide you with years of satisfaction. If
you observe stains or minor scratches in the acrylic surface, follow these steps to quickly repair your
bath.
IMPORTANT! This repair procedure is not appropriate for deep scratches, gouges, or chips. For
damage of that nature please contact a local solid surface repair professional.
NOTE: We recommend wet sanding to extend the life of the sandpaper, although dry sanding will
produce the same quality repair.
NOTE: Use 600 grit sandpaper to remove scratches and stains.
❑
Apply flat, even pressure with the sandpaper and move the paper in a circular pattern.
❑
Inspect your progress frequently to ensure a quality repair.
❑
Clean or replace the sandpaper as needed during the repair.
❑
When the damage is repaired, polish the area with clean 1000 grit sandpaper. Use a steady circular
motion to polish the repaired surface and surrounding area to restore the bath to its original finish.
❑
When you are finished, rinse the bath surface with clean water to remove any sanding dust and
debris. Use a clean cloth to dry the bath surface and then use a microfiber cloth AKA glass cleaning
cloth to polish the surface.
Содержание Boracay Series
Страница 3: ...Figure 2 Pop up drain ...
Страница 4: ...Figure 3 PVC drain assembly Option one ...
