48
• The appliance runs noisily
and/or very unevenly.
• The carbon brushes are worn. • Contact the service address on
the warranty card.
• The saw buckle cannot be
pushed up to remove the saw
blade
• The saw blade is stuck
• Tap gently on the end of the
saw blade with a hammer
8.2 Cleaning
Regularly clean the machine housing with a
soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the
dirt does not come off use a soft cloth moiste-
ned with soapy water. Never use solvents such
as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
8.3 Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the war-
ranty card. In the back of this manual you find
an exploded view showing the parts that can
be ordered.
8.4 Environment
To prevent damage during transport, the app-
liance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be col-
lected at the appropriate recycling
locations.
8.5 Warranty
The warranty conditions can be found on the
separately enclosed warranty card.
