Fenwal F1H-Q-RYW1K, Руководство по эксплуатации и инструкция

Страница: 11 / 14

730110 K0
11
ES1613
Page
5.2. Periodic Inspection
The items that must be inspected one or two times every 6 months to 1 year are listed below.
When the equipment is moved or modified, or layout of the wiring is changed, also perform this
inspection.
Do not needs to check smoke detect function with real smoke such as Tobacco, incense, etc. Because
this smoke detector has self check functions.
№ Item Object Content Method Judgment
Criteria
Treatment
1 Operating Temperature Common Used within the
specification?
Measure
with
a
thermometer.
-10
℃～
60
℃
Meets the
specification.
2 Operating Humidity Common Used within the
specification?
Measure
with
a
hygrometer.
30
～
85
％
RH Non
condensing
Meets the
specification.
3 Atmosphere Common IS there volatile
or corrosive
gas?
Measure
corrosive
gas. No tolerance to
acid and alkaline. Meets the
specification.
4 Power Supply Voltage Common Used within the
Power Supply
Voltage
specification?
Measure a
Power
Supply
voltage.
DC10.0V
～
DC30.0V
Meets the
specification.
5 Ripple Voltage Common Used within the
Ripple Voltage
specification?
Measure a
ripple
voltage.
300mVp-p Meets the
specification.
6 Installation Common Securely
locked?
Move the
detector to
check.
The detector must
be
installed
securely.
Retighten the
screws on the
base with proper
torque.
Obstacle near
the inlet/outlet
of detector?
Check
Visually Obstacle must not
be present. Removed.
7 Appearance Common Adhesion of dirt
and foreign
matter?
Check
Visually Dirt and foreign
matter must not
be present. Removed and
Clean.
Damages? Check
Visually Damages must
not be present.
Change the
detector.
8 Wiring Common Damages or
Breakages?
Check
Visually Damages must
not be present.
Change the
connector cable.
Adhesion of dirt
and
foreign
matter on the
connector?
Check
Visually Dirt and foreign
matter must not
be present. Removed and
Clean.
Looseness of
connectors Move the
wire to
check.
Connectors must
not be loose Change the
connector cable.
9 Behavior Normal
supervision
Detector State Indication
LED Check
Visually Blink 10 seconds
interval. Check the State
Indication
LED
behavior.
・
Please do not touch the terminal while the unit is energized. It may get an electric
shock.
・
Please do the cleaning and the increase tightening of the screw after the power
supply off. If not the power supply off, it may get an electric shock.
・
Do not soak a detector in water, and do not put a detector into water.
！
Warning