![Fenwal Controls FC1 Скачать руководство пользователя страница 21](http://html.mh-extra.com/html/fenwal-controls/fc1/fc1_operation-and-instruction-manual_553112021.webp)
730110 K0
21
E S 0 9 11
Page
5
5
5
5
.
Indication of the time of trouble
Indication of the time of trouble
Indication of the time of trouble
Indication of the time of trouble
When this system inspects trouble, the following warning is output from control unit.
(1) The trouble LED which responds to the contents of trouble lights up.
(2) The buzzer (intermittent sound) rumbles.
(3) The trouble signal contact is output.
(4) The trouble address of the detector which occurs is indicated in 7seg LED indication.
When the primary factor of trouble is a detector, the state indicating lamp of the detector
which is trouble state (red LED) it goes out. When warning is output, verifying trouble,
to following “6.the coping method at the time of trouble occurrence”, please correspond.
When there is a trouble primary factor in the detector, the state indicating LED (red LED)
of the detector which is trouble state goes out.
When warning is output, verifying the contents of trouble, to following “6.Procedures/steps
to be taken in the event of trouble occurrence”, please correspond appropriately.
Caution
!
!
!
!
The time of trouble occurrence, when you redo wiring or exchanging
the detector, Do it after turning off power.