Fenton RP135WSET, Инструкция по эксплуатации

Страница: 4 / 20

4
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. Tuning knob
2. USB port
3. Standby indicator
4. Standby button
5. Function button
6. PREV button
7. NEXT button
8. PLAY/PAUSE button
9. STOP button
10. REC button
11. BT indicator
12. REC indicator
13. OPEN/CLOSE button
14. Volume control knob
15. Antenna
16. Headphone jack
17. AUX IN jack
18. RCA output socket to connect external
speakers(with power amplifier built-in)
19. Power ON/OFF switch
20. DC IN connector
21. Speaker terminal IN (speaker)
22. Speaker terminal OUT (record player)
23. 45RPM adaptor
24. Turntable platter
25. Speed selector (RPM)
26. Tonearm
27. Auto stop ON/OFF
28. Tone arm lock
29. Cartridge/needle
LISTEN TO FM RADIO
•
Press standby button [4] to power on the device. The default mode is FM radio mode.
•
Rotate the tuning knob [1] to search for the FM radio station manually.
•
Press play/pause [8] for 2 seconds to search stations and save stations with name P01, P02, etc.
•
Press previous [6] or next [7] to switch between saved stations.
Recording
Plug in the USB drive to the USB port [2] at the front of the unit; press the REC button [10], the REC indicator [12] will light up
and
“USB” will be flashing on the display. The radio program will now be recorded onto the inserted USB drive; press the STOP
button [9] to save the recorded file and stop recording.
PLAYING A CD
•
Press the function button [5] to enter the CD mode; press the OPEN/CLOSE button [13] to open the disc tray, place disc label
side up on the tray. Press the OPEN/CLOSE button [13] to close the tray; the disc will start playing once loaded.
•
To pause playback, press the PLAY/PAUSE button [8]. To continue playback, press the PLAY/PAUSE button [8] again.
•
To stop playback, press the STOP button [9].
•
Press the PREV button [6] to skip backwards through tracks. Press the NEXT button [7] to skip forwards through tracks.
Recording
There are two ways to record CD to USB:
Recording of one track
•
Press the REC button [10], the REC indicator [12] will light up. REC appears on the display, ONE will soon appear after.
•
Press the REC button [10] to confirm the recording.
•
Press the NEXT button [7] to select the song to be recorded.
•
Press the REC button [10] to confirm the selection. The single song recording will automatically end when that song is
finished. During recording, you can also press the STOP button [9] to stop the recording.
Recording of all music tracks
•
Press the REC button [10], the REC indicator [12] will light up. REC appears on the display, ONE will soon appear after.
•
Press the NEXT button [7], then ALL will appear on the display.
•
Press the REC button [10] to confirm and start recording. During recording, you can press the STOP button [9] to stop the
recording.