9
STEP-BY-STEP
GUIDE
0800 002 725
|
fentec.co.nz
Insert channel cover clip and channel caps
Once all your slats have been assembled you can now
install the “Cover Clip”to the channel to hide all visible
fixings.
Make sure the cover clip is the same length as your
“Slat Channel” then you are ready to go.
The easiest way to do this is to use either a rubber
mallet or the rubber handle of your hammer. Insert
one edge of the cover clip into the channel then with
the rubber mallet/hammer handle from either the top
or bottom, Tap the other edge firmly, this will clip it
into place. Work your way to the other end until it is all
secured in place.
One all the slats have been installed, we have an
optional cap to cover the profile of the slat channel.
These consist of a left and right hand cap.
Caps are just inserted onto the top of the channel.
Cover clip hides screw
heads once fitted
Left & right
channel caps
Channel
cover clip
6.1
STEP 6 -
COVER CLIP INSTALLATION
Important:
It is important that the object you use to
tap the cover clip in with won’t damage the powder
coating.
Do not use the metal part of your hammer, this will
cause scratches or dents.
