Quick Installation Manual (ENG)
Watts V25 - PLUG-IN
1x
1x
INST
ALLA
TION
MANUAL
1.
Presentation
- The V25 receiver is a plug mounting receiver, specially designed to control an
electrical radiator regulation in combination with a wireless thermostat V22 type.
- This couple (Thermostat - Receiver) can also be managed by a Central V24 to
have a full control of your heating installation from one point.
- The V25 receiver can be used as slave unit of a V23 receiver.
- There is a possibility to use the V25 receiver as On/Off Timer in combination with a
V24 Central unit.
Make sure that all components of the wireless regulation system are marked with
the Fenix logo (description).
A combination with wireless products from different suppliers isn´t possible!
Box content
Install and plug the receiver into the following guidelines to guarantee an optimal reception:
- The receiver must be put at a minimum distance of 50cm of all others electrical or wireless materials like GSM, Wi-Fi router.
- Before wiring work related to the receiver must be carried out only when de-energized
- Connect your receiver to the power supply.
In order to maintain the correct installation of RF initialisation you need to follow next steps.
Installation 1: Re RF thermostat
1.
The receiver V25 must be put in OFF by pressing on the ON/OFF button
2.
The receiver must be put in RF init mode by 2-10sec pressing on the ON/OFF Button.
3.
Then the RF LED should flashes Red/Green indicating that the Receiver is now in radio configuration mode
waiting for a thermostat configuration address.
4.
Please refer to the thermostat leaflet
to
enter the thermostat in “RF Init” mode.
5. The receiver RF LED must
become to be solid green, then change to off position or heating position, it depends on thermostat set temperature. T
hermostat
should exit the RF init mode to indicate correct paring between both elements
.
Installation 2: Re RF Ther RF Central
1.
Make the “Installation 1” rules for pairing with the thermostat.
2.
The receiver must be put one time more in RF init mode by
2-10
sec pressing on the
On/Off
Button.
3.
Then the RF LED
button
should
flashes Green and Red
indicating that the Receiver is now in radio
configuration mode waiting for a thermostat
or V24
configuration address.
4.
Please refer to the Central
unit
leaflet for more explanation about the pairing mode “RF Init”.
5.
The receiver RF LED must
become to be solid green, then change to off position or heating position, it depends on thermostat set temperature. T
he Central
unit
will show a message to indicate correct paring between both elements
.
TECHNOLOGY CHARACTERISTICS
N898_R00 (13.03.2023)
•
•
•
•
Switch the outlet ON/OFF
Pairing a socket with a Thermostat V22 and a Central unit V24 WIFI
Pairing a socket with a receiver (V23 - V26 master)
Reset the socket to a factory settings
1 sec
2-10 sec
2-10 sec
10+ sec
The LED will turn BLUE
LED flashes RED and GREEN
LED flashes BLUE and GREEN
The LED flashes GREEN and then
CONTROL FUNCTIONS FROM OUTLET - OFF POSITION
flashes 1x RED, GREEN, BLUE
Switching between pairing the outlet with the thermostat and the receiver is done by pressing the flashing
control button on the socket.
Switching between pairing the outlet with the thermostat and the receiver is done by pressing the flashing
control button on the socket.
•
2-10 sec
LED flashes BLUE
CONTROL FUNCTIONS FROM THE SOCKET -
ON POSITION
Booster - Timer (default value 2h)
INLET
OUTLET
LED
POWER BUTTON
Smart wireless socket receiver
You will need the central Unit V24 and the Fenix
V24 WIFI Mobile app to control this socket
remotely. Only the Fenix V24 modular system is
compatible with this connection.
