◎
Double-layer body tube guards against corrosion
◎
Integrated white and red light illumination
◎
Digitally regulated output maintains constant output
◎
Intelligent over-heat protection to avoid high temperature of the surface
◎
Low-voltage warning reminds when battery replacement is needed
◎
Reverse polarity protection, to protect from improper battery installation
◎
Tail cap with big buckle for fast and convenient quick draw
◎
Made of durable aircraft-grade aluminum
◎
Premium type III hard-anodized anti-abrasive finish
◎
Toughened ultra-clear glass lens with anti-reflective coating
Operation Instruction
Rotate the magnetic ring to select the wanted output level.
From left to right, there are five output levels: Battery level, Red light, Off, Low and High.
Battery Level Indicator
When rotates the magnetic ring to the battery level output, there are three states: red
light constant-on displays sufficient power level, red light slow flash displays poor battery
level, red light quick flash displays critical battery level.
Low-voltage Protection
1. When the light works at High output, if the detected voltage is lower than the preset
voltage of 6.2V, the output will automatically downshift to 400 Lumens.
2. When the light works at High or Low output, if the detected voltage is lower than the
preset voltage of 6.0V, the output will automatically downshift to 100 Lumens.
3. When the light works at the Red light mode, if the detected voltage is lower than the
preset voltage of 6.0V, the output will automatically downshift to 25 Lumens.
Intelligent Over-heat Protection
The light will accumulate a lot of heat when it is working at High output. When the light is
overheated internally up to 65
or above, the flashlight will automatically adjust the
℃
output to prevent the light from overheating.
Battery Specifications
Type
Dimensions
Nominal
Voltage
Usability
Fenix ARB-L18 Series
18650
3.6 V /3.7V
Recommended
√√
Fenix ARB-L2 Series
18650
3.6 V /3.7V
Recommended**
√√
Non-rechargeable
Battery
(Lithium)
CR123A
3V
Usable
√