Fenix PTD55 SERIES Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 57

Fenix PTD55 SERIES Скачать руководство пользователя страница 24

PTD55 SERIES OPERATION MANUAL

CUTTER ERROR

[Description]

If the cutter is not working correctly either due to an internal malfunction or a
paper jam, this error pattern will be triggered.

[Status flags]

This error involves the following flags activation:

n=<01>

H Printer status → Offline

bit 3

=”1”.

n=<02>

H Offline status → Error occurred

bit 6

=”1”.

n=<03>

H Error status → Unrecoverable error occurred

bit 5

=”1”.

→ Cutter error occurred

bit3

=”1”.

[Recover action]

The printer tries to automatically recover from this error at printer initialization
(turning the printer on). Remove paper jam and try recovering the cutter blade
turning the printer on some times. If the autocutter does not return to its
normal position by itself, manually rotate the cutter motor gear to return the
cutter to its original position. (See Section -

OPEN CUTTER UNIT.)

BLACK MARK ERROR

[Description]

It will be triggered when, being the black mark option set, the printer has cut a
ticket but has not found the next black mark. The possible reasons may be:
a) The paper does not have black mark.
b) The black mark is not in the right position.
c) The black mark does not have the right size or intensity

[Status flags]

This error involves the following flags activation:

n=<01>

H Printer status → Offline

bit 3

=”1”.

n=<02>

H Offline status → Error occurred

bit 6

=”1”.

n=<03>

H Error status → Unrecoverable error occurred

bit 5

=”1”.

[Recover action]

If paper with no black marks is used replace it by the correct one.

[Note]

Two consecutive black marks cannot be separated more than 50cm.

PAPER JAM ERROR

[Description]

If an object obstructs the output, the paper may jam in the platen roller.

[Status flags]

This error involves the following flags activation:

n=<01>

H Printer status → Offline

bit 3

=”1”.

n=<02>

H Offline status → Error occurred

bit 6

=”1”.

n=<03>

H Error status → Unrecoverable error occurred

bit 5

=”1”.

n=<04>

H Continuous paper status → Paper present

bit 2

=”1”.

[Recover action]

Open the platen unit and remove the jammed paper.
Also, depending on the paper type, paper dust may stick to the platen and
may cause malfunction of the paper jam detector. In this case, clean the
platen roller.

24 of 57

«
...
22
23
24
25
26
...
»

Содержание PTD55 SERIES


























































Отзывы:

Нет отзывов