Fenix PA-607, Инструкция по эксплуатации

Страница: 12 / 20

12 12
ENGLISH
4. HOW TO USE
1. Assemble the base of the tower. The truss
(T1) and the truss-corner (T2) with the
connectors (A). The truss-corner and the box
with the connectors (B). Assemble both sides
of the box (T3).
2. Once the base is assembled, stabilize it
with the stabilizers.
3. Connect the hinge to the box, and also
connect the motor-support in case you are
using one.
4. Place the trusses horizontally, as well as the
top, at the side of the structure.
5. Join together the horizontal truss structure
with the upper hinges, and secure it with
safety pins.
6. Before rising the tower using a motor, pass
the chain through the top and tie it up with
a shackle and sling to the truss. Thus, the
motor will help to raise the tower.
7. In case of using a manual winch, attach it
to the ring in the top of the tower. Raise the
tower manually by pulling it from behind
with the help of cables and slings and pushing
the truss structure from the front. Secure it
using the safety pins (K).
8. Fix the frontal braces (L) at both sides of
the structure to secure it and give ballast.
ATTENTION:
DO NOT LOAD THE TOWER BEFORE
PLACING THE BRACES.
C
B
A
D
E
T4
T5
T6
T7
T1
T2
T3
H
C
B
A
D
E
T4
T5
T6
T7
T1
T2
T3
H
C
B
A
D
E
T4
T5
T6
T7
T1
T2
T3
H
I
F
H
J
L
K
www.audiovias.com