Unscrew the light head to take out the battery holder. Insert the batteries correctly according to the
signs at the bottom of the battery cassette. Put the battery holder into the tube with the round side
of the battery holder toward the light head and the groove in the side toward the raised place in the
inner wall of the tube. Screw the light head back on to test.
Usage and Maintenance
◎
Please don't disassemble the sealed head as doing so can cause damage to the flashlight and
will void the warranty.
◎
The circuit is programmed with a low-voltage protection function. If low voltage is detected, it
will enter into the lower brightness level. If low voltage is detected in the Low brightness level,
it will blink three times a second every 5 minutes. To allow normal use, LD41 will not turn off
automatically and will continue to work until the batteries are depleted.
◎
To get the most from this LD41, Fenix recommends using high-performance Ni-MH
rechargeable batteries. Alkaline batteries will reduce runtimes significantly
.
◎
If the flashlight is not to be used for an extended period, remove the batteries as the flashlight
could be damaged by electrolyte leakage or battery explosion.
◎
To avoid accidental activation, remove the batteries before packing and transporting the LD41.
◎
Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring
with an approved spare.
◎
Periodic cleaning of the battery contacts improves the flashlight's performance as dirty
contacts may cause the LD41to flicker, shine intermittently or even fail to illuminate for the
following reasons: Reason A: The batteries need replacing.
Solution: Replace batteries (Please confirm the correct installation of anode and cathode).
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please refer to the warranty policy before contacting your
authorized distributor.
Notice: The routine cleaning video can be watched and downloaded through Fenix official website,
please log onto the service channel->“maintenance for light”.
Product Warranty
We will replace products with documented manufacturing defects within 15 days of purchase and
repair a light free of charge within 24 months of purchase if problems develop with normal use; if
repair is required after 24 months from the date of purchase, we will charge for parts. The total
repair fee is dictated by the cost of the replaced materials.
Warranty Card Registration
We kindly suggest that you register your guarantee card on the official website of Fenixlight
Limited. You’ll receive an extra six months of warranty coverage once you have successfully
registered. By participating in an optional customer survey, you are entered in a drawing for free
Fenix products.
Warning
LD41 is a high-intensity lighting device and capable of causing eye damage to the user or others