Fenix G56, Руководство пользователя

Страница: 16 / 36

Fenix G56
16
Rev. 0.7 – V-Link only
Using 4 x HW012 countersunk screws, fix
the motor holder to the motor pod.
Tight the screws evenly using an “X”
pattern
Fix the G56-021 brace to the group
using 4 x HW008 M3x6 button
screw.
Tight the screws evenly using an “X”
pattern
Insert the ride height adjuster and the
flanged bearings (bearings might be located
in the differential bag)
NOTE: ride height adjuster might require
some sanding for an easy fit.
Install the FX-FU48
NOTE:
according the V-link setting the side dampers might
interfere with it.
To avoid it, install the FX-FU48 in the upper side to the shock
holder, this will provide enough clearance.
Wait to install the shock holder to the motor
group.