N074/R01(19.08.03)
ECOFILM MHF
an electric heating foil under mirror
EFFECTIVE SYSTEM FOR KEEPING THE
MIRROR COMPLETELY STEAM-FREE
FITTING INSTRUCTIONS
THESE INSTRUCTIONS SHOULD BE FOLLOWED TOGETHER WITH MIRROR
MANUFACTURER‘S INSTALLATION INSTRUCTIONS
SELF ADHESIVE - To be placed on back of mirror BACK VIEW - To be placed facing wall
I. ELECTRICAL CONNECTION
ECOFILM MHF should be connected to the lighting circuit so that it is activated when the light is switched
on, or to a separate switch if preferred.
Make certain the person installing the ECOFILM MHF has the
qualifications required by your country‘s laws
.
The wires are coloured in accordance with the following code:
BLUE ………...... NEUTRAL
BROWN ……….. PHASE
Wiring must be covered and inaccessible in compliance with relevant safety standards.
Power supply 230 Volts, Class II. Power density – 200W/m2
MULTIPLE PADS:
Several foils ECOFILM MHF fitted to a single mirror should be wired in parallel.
Care must be taken to ensure that the power supply is sufficient to take the load.
All metal parts surrounding the mirror must be earthed and comply with wiring regulations.
