Charging
1.
First loosen the light body to reveal the Micro USB charging port and plug the USB A socket of
the charging cable into an electrical outlet, then connect the micro USB socket of the charging
cable to the light.
2.
The indicator will display red while charging and will turn green when fully charged.
3.
Once charging is completed, be sure to tighten the light head to maintain the dustproof and
waterproof ability.
Note:
1. Charge the light timely when the battery power gets too low to ensure the normal life of the
battery.
2. The normal charging time is approximately 1 hour from depletion to full charging.
3. Recharge a stored light every four months to maintain the optimum performance of the battery.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used at High mode for extended periods. When the
light reaches a temperature of 60°C or above, the light will automatically step down a few lumens
to reduce the temperature. When the temperature drops below 60°C, it will then allow the user
for the reselection of the mode.
Usage and Maintenance
Disassembling the sealed head can cause damage to the light and will void the warranty.
Lock the light to prevent accidental activation during storage or transportation.
Long‐term use can result in O‐ring wear. To maintain a proper water seal, replace the ring with
an approved spare.
Included
Fenix E05R flashlight, Micro USB charging cable, Key chain, Spare O‐ring, User manual, Warranty
