twice on Low to indicate locked status.
Unlock
With the light locked, double click the switch the light will be unlocked and activated on Low.
*In locked status, clicking or pressing the switch will activate 2 one‐second blinks on Low to indicate
locked status.
Charging
1. First switch off the light and plug the USB A socket of the charging cable into an electrical outlet,
then connect the USB Type‐C socket of the charging cable to the light.
2.The indicator will display red while charging, and will turn to green when fully charged.
3. Be sure to close the anti‐dust cover once charging is completed.
Note:
1.The normal charging time is approximately 1 hour and 30 minutes from depletion to full charging.
2.Recharge a stored light every four months to maintain optimum performance of the battery.
Battery Level Indication
With the light switched off, single click the switch to check the battery status, which will last for 3
seconds.
Green light on: saturated 100% ‐ 80%
Green light flashes: sufficient 80% ‐ 50%
Red light on: poor 50% ‐ 20%
Red light flashes: critical 20% ‐ 0%
Intelligent Overheat Protection
The light will accumulate a lot of heat when used on High mode for extended periods. When the
light reaches a temperature of 60°C or above, the light will automatically step down a few lumens
to reduce the temperature. When the temperature drops below 60°C, it will then allow the user
for the reselection of High mode.