Smart Access MI-HDMI – User’s Manual
Page
4
2. Device connection Instruction
a) Take out the device insert into your TV HDMI port(if there is no enough space
around HDMI interface for Smart Access, please use HDMI extend cable), make
sure source is HDMI input mode.(Refer to TV set user manual).
b) Power supply connection: take out Micro USB cable to USB cable, connect the
Smart Access with TV via this cable; If the TV USB port can’t provide enough
current, or if you are using a simple pc's monitor, please take USB power
supply.(Any USB power supply 5V/2A are available).
c)
Suggest using 2.4G wireless keyboard or mouse. Plug 2.4G receiver on USB
Host connector, if only mouse plugged, the device will provide soft keyboard
during operation; If the device detected the physical keyboard, the soft keyboard
will be hidden automatically.
3. Boot state
After powered around 10 seconds, the boot screen would appear.
After around 30 seconds, device would access to main screen;
