V
2.1
TM
FENIEX.
2019
INSTRUCTION MANUAL
WEB.
www.feniex.com
8
Mounting Option 2: No Bezel
1.) Place the large bolt (part #1) in the rear
of the control, as shown in the diagram.
2.) Secure the bolt by placing the bracket
(part #2) over the bolt so the bracket is
flush with the gasket.
3.) Secure the bracket and bolt to the rear
of the gasket with the two factory provided
screws (part #3).
4.) Mark the areas where the mounting
holes will be drilled. If the mounting surface
is part of the vehicle, make sure no vital
components could be damaged by the
drilling process.
5.) Drill two mounting holes on the
mounting surface, making sure no vital
components of the surface are damaged.
6.) Using customer provided screws,
secure the Wide Lux to the mounting
surface.
1
2
3
MOUNTING INSTALLATION