FENIEX
// INSTRUCTION MANUAL
WEB
//
www.feniex.com
6
TM
4.375”
1.
Place the unit against the
selected mounting surface.
2.
Mark the areas where the
mounting holes will be drilled. If
the mounting surface is part of
the vehicle, make sure no vital
components could be damaged
by the drilling process.
3.
Drill 2-3 mounting holes per
bracket in the marked surface.
Use hardware (not provided)
to secure the brackets to the
mounting surface.
MOUNTING INSTRUCTIONS
Important! Hardware is sold seperately.
Note! The above Diagram is not to scale.
Mark holes
6.4”
1.4”
