V
1.0
TM
FENIEX.
2018
INSTRUCTION MANUAL
WEB.
www.feniex.com
8
Mounting
3
Figure 5.0
1
3
2
Item #:
Description:
1.
Fusion Extrusion
2.
Mounting Hardware
3.
Mounting Bracket
(Sold separately)
Step 1
: To mount to bracketry, remove the
flat endcap and slide in provided bolts in the
back of the frame. Screw the flat endcap
back into the aluminum extrusion with the
original screws and attach bolts and nuts
with the brackets.
Step 2
: Mark the areas where the mounting
holes will be drilled. If mounting surface
is part of the vehicle, make sure no vital
components could be damaged by the
drilling process.
Step 3
: Drill two mounting holes in the
marked surface. If wires need to pass
through vehicle, drill a 0.5” diameter hole
for wire passage. Make sure to deburr holes
thoroughly.
Step 4
: Pass the wires through the 0.5”
diameter hole, and secure the lighthead
to the mounting surface with the provided
hardware.
