Feniex C-4017, Инструкция по эксплуатации, Страница: 8 / 14

Feniex Industries, Inc.
1.800.615.8350
/ feniex.com
8
1.) Place the unit against the intended
mounting surface.
2.) Mark the areas where the mounting
holes will be drilled. If the mounting surface
is part of the vehicle, make sure no vital
components could be damaged by the
drilling process.
3.) Pre-drill four 1/16" mounting holes on
the mounting surface, making sure no vital
components of the surface are damaged.
4.) Make sure to deburr the holes
thoroughly.
5.) Using customer provided screws,
secure the Typhoon Siren to the mounting
surface.
Typhoon Siren Mounting
3 7/8"
5 9/16"
1/16"
1 3/4"
0.16"
Typhoon Handheld
Mounting
1.) Place the Handheld nest against the
intended mounting surface.
2.) Mark the areas where the mounting
holes will be drilled. If the mounting surface
is part of the vehicle, make sure no vital
components could be damaged by the
drilling process.
3.) Drill two .16" mounting holes on the
mounting surface, making sure no vital
components of the surface are damaged.
4.) Place the Typhoon Handheld Controller
into the clip to hold the unit when not in
use.