3
|
Haleo Switch Series
www.feniex.com
www.feniex.com
Mounting Instructions:
See Figure 1.0 for instructions on
exchanging a switch in the panel frame.
1.) Select the switch to be removed
from the panel.
2.) To remove the switch, firmly press
the back of the switch from each side
and push it outwards from the switch
panel.
3.) Push in the new switch from the front
of the panel and snap it into the frame.
3.) Drill two, 0.125” mounting holes on
the mounting surface making sure no
vital components of the surface are
damaged.
4.) Make sure to de-burr the holes
thoroughly.
5.) Using customer provided screws,
secure the Haleo switch panel to the
mounting surface.
SPECIFICATIONS:
LED back lit switches
Lightweight, durable aluminum frame
Option between black momentary switch or red on/off switch
mounting surface
figure 1.1
Screw
Hole
figure 1.0
Switch
Haleo
Bracket
Mounting Instructions:
See Figure 1.1 for mounting details
1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface
is part of the vehicle, make sure no vital components could be damaged by the
drilling process.
