• Only use applicable containers to collect the fluids, for example engine oil.
• Clean all items that spill immediately and correctly discard the unwanted materials.
• Remove all unwanted material from the work area immediately.
1.1.6.3 How to prevent fires and fire equipment
• The crop material is flammable. Regularly
remove the unwanted crop material from the
machine to prevent a fire.
• Use a water type fire extinguisher, A class fire
extinguisher or other water source to
extinguish a crop fire.
• Examine the components to make sure that
they do not become too hot. Listen for noises
that are not usual during operation. Unusual
noises can show that a component has wear.
Worn components can become hot and start a
fire.
• Keep the fire extinguishers in a location that
you can access easily also near where the fires
can occur.
- Examine the fire extinguishers regularly,
refer to the manufacturer's equipment
manual.
- Make sure that the fire extinguisher is full
and in a condition that operates.
• For fires of material other than crop (for
example oil or electrical components), use a dry
chemical fire extinguisher of A, B or C class.
• Before you cut, weld, or grind on the machine,
remove flammable materials from the machine
and the work area.
• If a fire occurs, move out of the smoke and
away from the fire. Get aid from your local
emergency services.
GUID-8FDCA67C-244A-40BA-967B-3FA4E7667A7E-high.jpg [High]
Fig. 14
1.1.6.4 High pressure leaks
• The fluid that leaks from the hydraulic system
or the fuel injection system is at a high
pressure and is not easy to see.
• If the fluid goes into the skin, you must get
medical aid immediately. If the fluid is not
removed immediately, injury or death can occur.
• Use the applicable procedures to find possible
leaks.
- Do not use your bare hand.
- Put on the correct personal protective
equipment before you look for leaks.
• Before you replace hydraulic lines:
- Remove all pressure from the system.
- Put all equipment in the maintenance
position and install the supports if it is
applicable.
- Close the applicable accumulator valves.
- Stop the engine.
GUID-CB450E2E-50DF-4D16-9E59-21C0B3E5B026-high.jpg [High]
Fig. 15
GUID-8B9D8656-A8AB-4AE5-AD08-9140D90556E1 [V1]
GUID-79804E84-5AE4-43FC-871E-0632EEF914F7 [V1]
1. Safety
17
609148D1A
